CNMI Hard Clear UV Resin Ultraviolet Light Cure Resin UV Resin for Jewelry Making DIY Craft Decoration Casting and Coating

Product Description

CNMI FDA Compliant Solid Color UV Resin Transparent Color UV Glue for Hand Carfts UV Adhesive

What is CNMI FDA Compliant Solid Color UV Resin Transparent Color UV Glue for Hand Carfts UV Adhesive

COLORED UV RESIN :The colored UV resin , ready to use . No mixing is necessary , the resin is ready for use .
SAFETY :Our colored UV resinpigment made of high-quality environmentally friendly material , are non-toxic , no harsh chemicals . There is no strong odor before curing , and it will disappear after curing .
WIDE USE :These colored UV resin can be widely used on resin jewelry and crafts decorations , jewelry making , garment accessories , or other DIY making . But not for the large projects .
PERPECT GIFTS : It will become an amazing resin craft ! Perfect gifts for family members , friends and resin DIY lovers !
EASY TO USE : The special designed nozzle can help you control the amount easily,squeeze and draw directly from the fine nozzle to create your favorite pattern easily . No need measuring and mixing like AB resin .

Setps 1	Squeeze the desired colored UV resin into the mold(Add glitter or other decorations if needed).
Setps 2	Place the mold under the UV light for 1-3 minutes curing.
Setps 3	Cool down for 5-7 minutes. then demold to get your beautiful creation.

Product Description

Company Profile

FAQ

Q1:Why UV resin has been illuminated under UV light for a few minutes or even a few hours, still sticky, not curing?
Several possible reasons for this:
1. Wrong molds. Molds that are large, deep or opaque are for epoxy resin crafts making, not for UV resin.
2. Wrong pigments. Not all pigments work with UV resin. Alcohol inks and opaque pigments are not recommended. If you need to use darker colors for your art, mix well and cure in layers.
3. Too much adding. Adding too much pigments, glitters, mica powder or other fillings, will lead to a light impenetrable mixture that hard to be cured.
4. Insufficient UV exposure. Please make sure both the upper and bottom side of your silicone mold get enough UV exposure. This means that after you cure the top, you have to cure the bottom, too. Cool down for about 5-7 minutes before next time curing is recommended.
Q2: Why does UV resin have bubbles and how to get rid of them?
The height of the pouring is too high, the mixing speed is too fast, low temperature increases the viscosity of UV resin, and
other factors will lead to bubbles. Here are some tools may help: Resin Bubble Remover, Heat Gun, Dropper, Toothpick.
Q3: Why is the color of the extruded UV resin uneven?
Leaving for a long time may cause pigmentation in the UV resin.
If that happens, shaking for a few minutes before use can help.
However, it is worth noting that this operation may cause bubbles, so please let it stand for a while to defoam before using. Or use the defoaming tools mentioned above.
Q4: How to clean the UV resin from hands?
Special resin cleaner will help.
If you don't have it, please try:
1. Wipe off with paper towels immediately, rub with detergent, and rinse.
2. Wipe off with paper towels immediately, rub with medicinal alcohol or edible white vinegar, and rinse.
3. Wipe off with paper towels immediately, rub with cleansing oil, and rinse.
4. Wipe off with paper towels immediately, rub with flour or loose powder, and rinse.
For your enjoyable craft experience, Honcaring sincerely recommends you, your friends and families put on gloves and apron, and tie up long hair before use.

Contact Information